CNC Swiss
Turned Shafts Precision CNC Swiss Turned
Component Parts Prototypes,
Reverse
Engineering Rubber Rolls,
Roll Grinding,
Roll Assemblies
and Refurbishing Secondary
Operations
ISO 9002 Compliant |
Showcase
Click on any picture to enlarge
| 0316 |
Brass Valve Assembly |
| Material : |
Body & Cap-.562" OD 360 Brass |
| Process : |
Turn Body, Drill & Tap ID
Turn Cap, Turn Piston. Assemble "O"
Ring, Spring & Cap. Pressure Test. | |
| 0320 |
Video Camera Assembly |
| Material : |
Body-1.00" OD 360 Brass Tubing |
| Process : |
Turn & Thread Body, Turn and ID thread Lens
Holder, Turn, ID Thread, Cross Drill & Tap | |
| 0357 |
Brass Mounting Post |
| Material : |
0.625 OD 360 Brass |
| Process : |
Turned, Threaded
Tapered End Cap. | |
| 0358 |
Stainless Steel Drive Pin |
| Material : |
.625 OD 304 Stainless Steel |
| Process : |
Turned, Threaded, Milled | |
| 0349 |
Aluminum Lens Retainer |
| Material : |
.750 OD 2011 T3 Aluminum |
| Process : |
Turn & Thread OD, Bore & Polish ID. | |
| 0360 |
Stainless Steel Actuator |
| Material : |
.625 OD 316 Stainless |
| Process : |
Turned, Slotted, Drilled & Tapped,
Center less Ground
| |
| 0364 |
Stainless Steel Spray Nozzle |
| Material : |
.500 OD 316 Stainless Steel |
| Process : |
Turned, Threaded, Cross Drilled, Electropolished | |
| 0356 |
Steel Drive Pin |
| Material : |
10mm OD 4140 Steel |
| Process : |
Turned, Milled, Knurled, Center less, Ground, Armorloy Coating | |
| 0375 |
Hardened Steel Adjusting Pin |
| Material : |
.500 OD 4150 Steel |
| Process : |
Turned, Threaded, Broached, Hardened, Black Oxide Finish | |
| 0376 |
Delrin Spool |
| Material : |
.375" OD White Delrin |
| Process : |
Turned | |
| 0359 |
Serrated Drive Pin |
| Material : |
.500 OD 316 Stainless Steel |
| Process : |
Turned, Threaded, Milled, Serrated, Center less Ground | |
| 0368 |
Stainless Steel Adapter |
| Material : |
.375 OD 304 Stainless |
| Process : |
Turned, Drilled, Cross Drilled, Passivated
| |
| 0394 |
Stainless Steel Idler Pin |
| Material : |
.3125" OD 303 Stainless Steel Turned, Milled | |
| 0434 |
Steel Gudgeon |
| Material : |
1.00" OD 41L40 |
| Process : |
Turn OD, Drill & Tap ID, Mill Square Flats | |
| 0425 |
Nylon Hex-Thumb Screw Assembly |
| Material : |
Head-1.00" OD Black Nylon.
Threaded Fastener-.625 OD 360 Brass |
| Process : |
Turn & Drill Nylon Head, Mill Hex, Mill Finger Grooves.
Turn & Thread Brass, Knurl OD for Assembly.
Assemble Components. | |
| 0385 |
Silicone Feed Roll |
| Material : |
Core-416 Stainless Steel
Covering-45 Duro meter Silicone |
| Process : |
Blank Disc, Turn Pins, Rivet Pins To Disc, Bond Silicone, Cylindrical Grind OD, Grind Serrations. | |
| 0379 |
Neoprene Drive Roll |
| Material : |
Core-2.00" OD PVC
Covering- 60 Duro meter Neoprene |
| Process : |
Turned, Drilled & Tapped Bond Neoprene, Cylindrical Grind OD | |
| 0382 |
Thermoplastic One Way Drive Roll |
| Material : |
Core .875" OD 416 Stainless Steel
Covering- 70 Duro meter Neoprene |
| Process : |
Turned, Bored ID, Cross Drilled, Assemble Clutch Bearing, Bond Neoprene, Cylindrical Grind OD
| |
| 0413 |
EPDM Copier Feed Roll |
| Material : |
Shaft-.375" OD 303 Stainless Steel, Core-.875" OD 6061-T6 Aluminum, Covering-70 Duro meter EPDM |
| Process : |
Turn Shaft, Center less Grind Journals, Broach Flat, Turn & Drill Core, Bond EPDM to Core, Cylindrical Grind OD, Assemble Bearings. | |
| 0401 |
Neoprene Hold Down Roll |
| Material : |
Shaft-.250" OD 303 Stainless Steel, Rolls-.500 Dia 60 Duro meter Neoprene |
| Process : |
Turn Shaft. Bond 4 Neoprene Rolls, Cylindrical Grind OD | |
| 0412 |
Urethane and Nylon Corrugators Roll |
| Material : |
Shaft-.375" OD 416 Stainless Steel, Rolls- 2 Urethane, 5 Nylon |
| Process : |
Turn, Broach, Center less Grind Shaft, Bond Urethane Rolls, Cylindrical Grind OD. Knurl Shaft 5 Places For Nylon Rolls, Assemble Rolls, Assemble Bearings. | |
| 0421 |
Neoprene Drive Roll |
| Material : |
Shaft-.1875 OD 316 Stainless Steel. Covering-60 Duro meter Neoprene. |
| Process : |
Turn Shaft, Knurl. Assemble and Bond Neoprene Tubing, Cylindrical Grind OD. | |
| 0438 |
Brass Drive Shaft |
| Material : |
.250 Square 360 Brass |
| Process : |
Turn Complete, Straighten. | |
| 0442 |
Copper Feed Tube |
| Material : |
.500 OD 110 Copper Alloy Tubing |
| Process : |
Turn & Cutoff to Overall Length, Drill 5 Cross Holes. Centerless Grind OD, Centerless Polish OD for 8 Micro Finish.
| |
| 0457 |
Stainless Steel Feed Roll Shaft |
| Material : |
1.00" OD 303 Stainless Steel |
| Process : |
Turn Journals, Drill Cross Hole. | |
| 0355 |
Stainless Steel Drive Pin |
| Material : |
.500 OD Stainless Steel |
| Process : |
Turned, Broached, Slotted Centerless Ground Passivated | |
| 0447 |
Steel Splined Drive Shaft |
| Material : |
.437" OD C1215 Splined Stock |
| Process : |
Turn Journals, Mill Flat | |
|
|
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)